* This post may have affiliate links. Please see my Disclosure.*

Reply To: Different OTA Channels on Different TVs Hooked Into Same Antenna System

#4324
Johan
Keymaster

It could be several things. The TV receiving fewer channels could be father way and the cable runs are longer. It might require a powered splitter to boost the signal. This would allow the tv to have a stronger signal. The other issue I have seen, not all tuners are built alike. Depending on the television manufacturer, some tuners work better than others. I have two televisions both using the same antenna each TV has different manufacturers. One tv tuner works better than the other. You could try swapping TVs and recan. See if it makes a difference. Then you could determine if it’s the tuner or if you need a powered splitter.

Subscribe to Blog via Email

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 2,043 other subscribers

November 11, 2020 0

Improve Signal Interference With The Channel Master LTE Filter

Unfortunately, signal interference has become more common with people using an over the air antenna. The popularity of smartphones has increased the amount of wireless interference. Cell towers are operating very close to OTA signal frequencies. This can cause pixelation and dropped signals to your OTA television signal. One way to eliminate this problem is to add a Channel Master LTE Filter. An LTE filter will improve your OTA signal by filtering out LTE, 5G, 4G, and 3G mobile interference. The installation is as simple as screwing in the filter between your antenna and the amplifier. Antenna Interference Before you add an LTE filter make sure you know where the interference is coming from. In many cases, it can be [...]
Ad