* This post may have affiliate links. Please see my Disclosure.*

Improve Signal Interference With The Channel Master LTE Filter

Unfortunately, signal interference has become more common with people using an over the air antenna. The popularity of smartphones has increased the amount of wireless interference. Cell towers are operating very close to OTA signal frequencies. This can cause pixelation and dropped signals to your OTA television signal. One way to eliminate this problem is to add a Channel Master LTE Filter. An LTE filter will improve your OTA signal by filtering out LTE, 5G, 4G, and 3G mobile interference. The installation is as simple as screwing in the filter between your antenna and the amplifier.

Antenna Interference

Before you add an LTE filter make sure you know where the interference is coming from. In many cases, it can be attributed to electromagnetic interference. Antenna interference can also be caused by many household appliances like a blender, fan, laptop computer, or LED lights. For more information see our article on how to identify OTA antenna interference.

Channel Master LTE Filter

If you are experiencing weak signals, pixelation, or channel loss an LTE filter can help improve your antenna signal. The Channel Master LTE Filter is designed to remove cell tower and cell phone interference. To install just screw the filter between the antenna and your amplifier or TV.

Features and Benefits

  • Blocks interference from 3G/4G/5G smartphones and transmitters
  • Minimal setup is required
  • Professional-grade construction and quality
  • Improves poor picture quality on TV antenna channels affected by LTE interference
Channel Master:

Channel Master LTE Filter


Channel Master LTE Filter

Channel Master Amplify Adjustable Gain Preamplifier

Another option is to add an adjustable gain amplifier with a built-in LTE filter. This can be helpful if you do not have an existing amplifier or want to upgrade to a more effective one. The Channel Master Amplify Adjustable Gain Preamplifier offers an adjustable gain allowing for better control of how much amplification gets passed to the TV tuner. This can help to decrease over-amplification to the TV tuner which can cause channel loss due to signal overload.


Channel Master Amplify Adjustable Gain Preamplifier


Channel Master Amplify Adjustable Gain Preamplifier

Another good alternative:

ANTOP SBS-602B HD Smart Boost Antenna Amplifier

The Antop Smart Boost Amplifier offers a built-in LTE filter. It also has dual outputs allowing you to connect to more than one device simultaneously.


Antop Smart Boost Amplifier


Antop Smart Boost Amplifier


Since the FCC repack, many frequencies have been moved around and are now overlapping which can cause signal issues. If you are having signal interference try adding an LTE filter. It can help to improve your OTA antenna reception.

Subscribe to Blog via Email

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 2,275 other subscribers

April 6, 2021 0

Netgear CM500 Cable Modem Review and Setup

Last updated: Tuesday, April 6, 2021Recently my Cisco cable modem stopped working. To save money I always purchased my own cable modem as not to get charged for a monthly rental from my cable company. The lights on the front of the modem were not lighting up correctly. It was also making a strange high-pitched sound. I tried powering it up a few times but still had the same problem. I should have noticed the signs of it failing this past year. The cable modem would randomly disconnect from my service provider and I had to power it down so it could reconnect. This was happening more frequently. It had a good run. Lasted about 12 years. When your internet goes down you suddenly realize how you and so many devices depend [...]
About Johan
I started this site to educate the public on alternative ways you can watch television besides subscribing to cable. I have been in the audio-visual business for over 20 years. I also have an extensive computer networking background. I am a Microsoft Certified Professional and CompTIA Network+ Certified Technician. I hope you will find my articles and reviews helpful in conscious uncabling.

1 Comment

  1. While virtually every chinese and foreign made antenna and preamp CLAIMS to have a built in LTE filter, 95% of them are designed for FOREIGN markets so they only filter above 790Mhz which makes them useless in the US where cellular towers are now saturating the 700Mhz and now600Mhz bands.
    The Channel Master LTE filter is the only one that actually filters out EVERYTHING above tv channel 36 so it’s the only one to use

Leave a comment

Your email address will not be published.